Email Address:
Password:

Lost your password?

This is the legacy website; please use the new website.

PICAXE VSM: I'ts Time to Play; Pt.3

In the third part of our PICAXE VSM tutorials Clive Seager talks us through using some of the 'virtual instrumentation' included with the software - from a simple voltmeter to an advanced I2C protocol debugger!

By Clive Seager

Click for larger image
Fig.1: simple LED circuit with voltmeter attached.

After you have designed a circuit using PICAXE VSM, you will naturally want to test it! Fortunately VSM has a wide range of ‘virtual instruments’ available for testing purposes. This article assumes you have worked through the tutorials in parts 1 and 2 of this series, so are familiar with drawing circuits in the VSM software.

Share this Article: 

Privacy Policy  |  Advertise  |  Contact Us

Copyright © 1996-2019 Silicon Chip Publications Pty Ltd All Rights Reserved